Plastisol ink from the AMEX PLAST PF range, opaque with a glossy finish, for textile screen printing.
Features
- High opacity and bright colours
- Good wet-on-wet printability
- Good elasticity, soft touch
- Phthalate free, nonylphenol and heavy metal free
Preparation
Ready to use – stir well before printing. All colours in the range can be mixed with each other in any ratio; do not mix more than three bases at a time. For a more matt result and a softer hand add up to 60% PLAST PF TRASPARENTE.
Printing and curing
Set off-contact and squeegee pressure carefully for best opacity and shade. Recommended emulsion: SCREEN-SOL QT BLU. Cure at 150–160 °C for 2–3 minutes. Always check curing conditions: only a fully fused film delivers the final properties.
Cleaning
Clean tools with SOLVENTE 105.
Note: plastisol inks do not withstand dry cleaning or direct ironing.
This shade
Transparent base for mixing: add up to 60% into the other PLAST PF colours for a more matt result and softer hand.
Safety
Wear gloves when handling and cleaning up with solvent. Work in a ventilated area.
